Construction and application of an electrochemical sensor based on graphene-MXene nanocomposites for baicalin detectionEI北大核心CSCD

Redox graphene-MXene(rGO-MXene) nanocomposites were prepared by ion polymerization and used to construct a highly sensitive electrochemical sensor for baicalin(BA) detection. The synergistic effect of rGO and MXene increased the specific surface area and electron transport capacity of the electrode, and significantly enhanced the electrochemical response of BA. The cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical behavior of BA on the sensor. Under the optimal conditions, the peak current exhibited a good linear relationship with BA concentration in the range of 0. 05-10 μmol / L, and the limit of detection was as low as 28 nmol / L. The method was applied to analyze traditional Chinese medicine preparations containing baicalin, such as Qingkailing Capsule and Sanhuang Tablets with good accuracy and spiked recovery. The results were highly consistent with those of high performance liquid chromatography, providing a technical means for the rapid and sensitive detection of traditional Chinese medicine preparations. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

Single-atom Fe Embedded Co3S4 for Efficient Electrocatalytic Oxygen Evolution Reaction

Constructing atomically dispersed active sites with densely exposed and dispersed double metal-S_x catalytic sites for favorable OER catalytic activity remains rare and challenging. Herein, we design and construct a Fe₁S_x@Co₃S₄ electrocatalyst with Fe single atoms epitaxially confined in Co₃S₄ nanosheets for catalyzing the sluggish alkaline oxygen evolution reaction(OER). Consequently, in ultralow concentration alkaline solutions(0.1 mol/L KOH), such a catalyst is highly active and robust for OER with low overpotentials of 300 and 333 mV at current densities of 10 and 30 mA/cm², respectively, accompanying long-term stability without significant degradation even for 350 h. In addition, Fe₁S_x@Co₃S₄ shows a turnover frequency(TOF) value of 0.18 s⁻¹, nearly three times that of Co₃S₄(0.07 s⁻¹), suggesting the higher atomic utilization of Fe single atoms. Mössbauer and in-situ Raman spectra confirm that the OER activity of Fe₁S_x@Co₃S₄ origins from a thin catalytic layer of Co(Fe)OOH that interacts with trace-level Fe species in the electrolyte, creating dynamically stable active sites. Combined with experimental characterizations, it suggests that the most active S-coordinated dual-metal site configurations are 2S-bridged (Fe-Co)S₄, in which Co-S and Fe-S moieties are shared with two S atoms, which can strongly regulate the adsorption energy of reaction intermediates, accelerating the OER reaction kinetics.     

Multi-targeted molecular docking,drug-likeness and ADMET studies of derivatives of few quinoline- and acridine-based FDA-approved drugs for anti-breast cancer activity

Structural Chemistry - Quinoline- and acridine-based drugs are widely used as anti-breast cancer agents. These drugs act through various mechanisms of action; for example, neratinib acts on...     

拓扑近藤绝缘体SmB6中的奇异电子性质

拓扑近藤绝缘体是一种本征的强关联拓扑电子体系，其体能隙来源于近藤关联效应。自2010年拓扑近藤绝缘体的理论概念被提出后，六硼化钐(SmB6) 作为第一种被预测为拓扑近藤绝缘体的材料在这十多年中被多种实验手段反复研究验证，被广泛接受认为是第一种拓扑近藤绝缘体。在这篇综述中，我们回顾了关于SmB6 的一些重要实验结果，比如电输运测量，角分辨光电子能谱(ARPES), 表面形貌分析(STM) 等，并论述了如何通过这些关键的实验证据证实SmB6 的拓扑近藤绝缘物相。同时，我们也展示了SmB6 这一关联电子体系的其他奇异物性，包括中间价态在表面和体内的分离现象，以及量子振荡发现的体振荡信号等等。这些性质表明我们对SmB6 这一材料的理解仍然不充分，其中还有更为丰富的物理值得挖掘。     

基于TOPSIS模型的机场网络节点重要度评估

在机场网络中单个机场节点的失效往往会对其他的节点产生影响,特别是关键节点的失效会波及整个网络.准确客观的识别重要节点机场关乎整个机场网络的安全运营.本文分析了机场网络拓扑特性中的度、集聚系数和接近度指标,考虑了机场旅客吞吐量和所在城市人口等交通经济特性指标,使用熵权法确定权重的基础上,应用TOPSIS法构建综合评价体系模型,最后以华东地区机场网络为例进行节点重要度排序.结果表明与单一指标的评估结果相比,该方法更加全面客观的确定不同属性指标的权重,避免了不同指标取值的差异性,使评价更加全面,更符合机场网络实际运营情况.     

Effect of Oil Viscosity on Hydraulic Cavitation Luminescence

Fluid Dynamics - The collapse of cavitation bubbles in a hydraulic system generates localized zones of high temperature and pressure and, under certain conditions, luminescence. In this study, we...     

p-Adic函数空间上Hardy型算子的多线性交换子估计

在p-adic域上研究分数次Hardy型算子与CMO(Q_p~n)函数生成的多线性交换子,建立了交换子在Lebesgue空间和Herz空间上的有界性.对Hardy算子的多线性交换子也得到了相应的结果.     

改进型单晶炉提拉系统偏心平衡研究

随着光伏行业的快速发展, 对硅单晶的品质和长晶装备的稳定性的要求也不断提高。直拉法是生产硅单晶的主要方法,通过提高单晶炉副室的高度以扩大单晶硅的生产规模。由于副室高度的大幅增加,且单晶炉提拉头质心相对于旋转轴心有一定距离,对单晶炉整体稳定性有较大影响,从而降低了单晶硅的生产质量。针对此问题,对单晶炉建立可靠的力学分析模型,采用数值仿真方法,对单晶炉整体进行动力学响应分析,计算得到副室高度增加后的单晶炉工作时中钨丝绳下端晶棒的运动规律以及最大摆动幅度,为改进设计提供依据。数值仿真分析表明提高单晶炉副室高度后,提拉头较大的质心偏心是单晶炉提拉系统发生摆动的主要原因。在此基础上提出在提拉头上添加质心调节装置,通过控制系统调节可保证提拉头质心位置在旋转轴线上以降低提拉系统的摆动。     

Instability analysis for semi-active control systems with semi-active inerters

Nonlinear Dynamics - In this paper, the instability of semi-active control systems caused by the utilization of semi-active inerters is analyzed. The purpose of this study is to demonstrate the...     

优化端点条件的平面二次均匀B样条插值曲线

在利用反求法构造B样条插值曲线时，往往需要选取端点条件。 因此，可对端点条件进行优化选取，使得构造的B样条插值曲线满足特定要求。提出了一种利用曲线内能极小选取平面二次均匀B样条插值曲线端点条件的算法。首先给出了二次均匀B样条插值曲线分控制顶点与首个控制顶点（即端点条件）的递推关系式；然后给出了利用曲线内能极小优化选取首个控制顶点的算法，证明了利用该算法构造的C¹连续二次均匀B样条插值曲线为保形插值，并通过数值算例证明了算法的有效性；最后，为便于实际应用，基于MATLAB平台设计了算法所对应的图形用户界面，用户通过简单的操作即可获得光顺的C¹连续二次均匀B样条保形插值曲线。